kjhgfd

Sanitisation of inner surfaces of air distribution ducts, CMV, fan coil units and ATU.

Radiana DUCT devices prevent the formation of chemical and biological contaminants (moulds, bacteria and legionella) on inner surfaces of distribution ducts and air treatment machines, and in the surrounding air.

Sanitisation takes place continuously, thus preventing dust deposits from becoming the ideal substrate for the development of mould and bacteria.

Pure Living

DUCT are decontamination devices that feature essential lines and use cold plasma technology to eliminate bacteria, mould, viruses, pollutants and odours from piping’s inner surfaces, air treatment units and controlled mechanical ventilation systems plenum. Air contamination in air-conditioned environments can be caused by the bad maintenance of the aeraulic system. There are two different “risks” of contamination, depending on the type of induced transmission:

  • The danger of chemical contamination from the build-up on instruments of contaminants coming from outside (through an external air intake) and from inside the building (through the recirculation circuit).
  • The microbiological contamination caused by the proliferation of microorganisms: bacteria and viruses, mould and yeasts, for which the dust deposits are the ideal substrate for diffusion.

DUCT devices guarantee the introduction of good air inside the rooms.

Technology

jh

Radiana DUCT use an advanced oxidation process for the decontamination of air induced by NON-THERMAL PLASMA (NTP)

Cold plasma is a physical phenomenon generated at room temperature. Plasma is an ionized gas consisting of various electrically charged particles: ions, atoms and molecules of organic and chemical origin that collide with each other producing oxidizing species. It is considered the safest process to oxidise and decompose pollutants; the process is scalable, according to the the sanitisation requirements. Air sanitisation devices Radiana DUCT with NTP technology (Non-Thermal Plasma) are used for the sanitisation and decontamination of air and surfaces in all aeraulic systems.

Design

fjksd

They are compact, modular and easy to install. Designed to fit all plants, even existing ones, and to be installed in small spaces. Depending on the needs of the plant, Jonix inside devices can be integrated both during the construction stage and in existing plants. In aeraulic ducts, they can be easily fixed to the wall (in horizontal or vertical position) and to the ceiling. In system components, the housing should be agreed with the builder. They are available in different models and sizes and can be dimensioned according to the air flow.

Technical Specifications

DUCT 70MIC2C
Dimensions mm: 290 L x 350 P x 200 H
Weight kg: 4
Air flow m3/h: 500
Comsumption: 10 W
Power supply: 230 V /~/ 50 Hz

DUCT 70MIC4C
Dimensions mm: 290 L x 350 P x 200 H
Weight kg: 5
Air flow m3/h: 1000
Comsumption: 8 W
Power supply: 230 V /~/ 50 Hz

DUCT 70MIC2F

Dimensions mm: 290 L x 350 P x 700 H
Weight kg: 5
Air flow m3/h: 2000
Comsumption: 9 W
Power supply: 230 V /~/ 50 Hz

DUCT 70MIC4F
Dimensions mm: 290 L x 350 P x 700 H
Weight kg: 6
Air flow m3/h: 4000
Comsumption: 11 W
Power supply: 230 V /~/ 50 Hz

Cube - Stand alone unit for rooms up to 85m3

Mate - Larger stand alone unit for airflow between 400 - 6000m3/h

Steel - For rooms sizes between 105m3 - 2000m3

Duct - In duct applications for airflow between 500 - 4000m3/h

Brochure and Product Selector